Every circuit and breaker box is very likely to be different. That's why with our adjustable sensitivity dial you can manually adjust the frequency for every job you do. This allows for 100% accuracy every time.

Our circuit breaker finder is designed for easy use, making it accessible to just about anyone. Simply plug the transmitter into the desired socket, proceed to the breaker box, and scan each breaker switch with the receiver. The receiver will indicate the correct switch. You can then safely turn off the correct breaker switch.

Our circuit breaker finder was designed with US sockets and homes in mind and will work with any standard US socket.

Our circuit breaker find works at an operating Voltage of 90 to 120 VAC (designed to work perfectly with standard US sockets).

Yes our circuit breaker finder works perfectly with AC circuits between 90-120vac. However, please be aware that it is not suitable for use with DC circuits.

Yes, with our extension adapter kit (sold separately), you will be able to check not only sockets but also light bulbs and live wires!

What does a GFCI tester do? The ground fault circuit interrupter (GFCI) tester is used to reduce the risk of electrical shock generated from outlets by testing the electrical circuitry to see if there is imminent danger. This lets you test if the circuits in your home/building have been set up properly and are functioning the way they should be.

How does it work? You simply plug the Transmitter into the socket you want to test and then press the GFCI testing button. It will then indicate with its inbuilt lights if everything is okay, or if there is an issue and what the issue is.

What can it test? 
- Open Ground
 - Open Neutral
 - Open Hot
 - Hot/NEU Reverse
 - Hot/GND Reverse
 - Hot on NEU with Hot open

Our circuit breaker finder comes with a unique and very important feature, a frequency adjuster which lets you get the best accuracy on every breaker box/circuit.

To make the most of it:
 1. Start at high sensitivity and go through each breaker switch once.
2. If multiple breaker switches get beeps, slowly decrease the sensitivity and go through each breaker again.
3. You will reach a perfect sensitivity where only ONE breaker gets beeped on. This means that you are on the right sensitivity and this is the breaker switch that you are looking for.

Yes, in order for the circuit breaker finder to work, you must have power in your house/building going to the socket that you are after.

We offer a 30-day money-back guarantee.

What's in the box:
1x Circuit Breaker Finder (Receiver) 
1x Socket Tester (Transmitter)
1x User Manual
1x Tool Case (Special Offer)

Size:
Transmitter - 103x56x30 mm
Receiver - 192x54x28 mm

Operating Voltage - 90 to 120VAC (designed to work perfectly with standard US sockets)

Working Frequency - 47 to 63Hz (perfect for normal US sockets)
 
Power - 9V Battery (not included, but can be bought easily at any hardware or convenience store)